How to test microwave drying machine?

When we use the microwave drying machine, we should also check it accordingly, and check the problems in the machine in time, so that we can handle them in time and ensure the normal operation of the machine. This is a very necessary point, so when you use it, detection is necessary. So how to test? Now let’s have a look.

1. Check the cooling device of microwave drying machine

For the inspection of the cooling device, it is necessary to find out the cooling mode used by the machine. If water cooling is used, it is necessary to check whether the water pipe is leaking or blocked. For air cooling, check whether the fan is in good condition, whether the fan power supply is normal, and replace the damaged parts.

2. Check the high voltage capacitance of microwave drying machine

The resistance value of high-voltage capacitor parallel resistance is about 10 Ω; The resistance between the capacitor terminal and the housing shall be infinite. If the actual measured value is inconsistent with the above data, the corresponding components shall be replaced.

3. Check the high-pressure silicon stack of microwave drying machine

Use a multimeter to measure the forward resistance of the high-voltage silicon stack, which should be about 100k Ω, and the reverse resistance should be infinite. If the actual measured value is inconsistent with the above data, replace the high-voltage silicon stack.

After knowing the detection method of microwave drying machine, we will have control over our machine at any time during the subsequent use of the machine, so that we can learn about the situation in time and make solutions according to the situation. Therefore, regular detection is essential. When you choose, you can come to Shandong Dongxuya microwave to consult about microwave drying machine and microwave sterilization machine.